Back to all reports

Crossing near mr India restaurant

Reported in the Traffic lights & crossings problems with buttons, beep or lamps category anonymously at 10:03, Fri 18 October 2019

Received by Buckinghamshire Council moments later

Pedestrian Crossing Lights on London Road near Mr India. These lights were replaced a few months ago and have never worked properly since. I use the crossing twice a day and would say a high percentage of the time the lights do not work the first time you press the button. This morning I have had to press the button 5 times for them to change to be able to cross the road. Each time you press the button, the red lights (at the button) turn on then they go off after about 20-30 seconds but the main lights do not change so you cannot cross so you have to press the button again. As I have already stated I had to press them 5 times this morning so waiting for approx 2 minutes. I would like a reply as to the action you will take as these need amending so they work correctly

RSS feed of updates to this problem Receive email when updates are left on this problem.


  • Thank you for your report which is currently under review.
    We will investigate this and if you have provided an email address, we respond to you within 10 working days.
    We will continue to update you by email (if provided) when your report reaches key stages.
    IMPORTANT: To report anything dangerous, please call us on: 01296 382416 (09:00 – 17:30 Mon-Thurs, 09:00 – 17:00 Friday) or 01296 486630 (out of hours and weekends).
    Transport for Buckinghamshire

    Posted by Buckinghamshire Council at 10:05, Fri 18 October 2019

  • State changed to: In progress

    Updated by Buckinghamshire Council at 11:57, Fri 18 October 2019

  • Thank you for your report.

    We have fully investigated your report, however, we have been unable to identify the issue.

    Transport for Buckinghamshire

    State changed to: Closed

    Posted by Buckinghamshire Council at 14:56, Mon 9 December 2019

This report is now closed to updates. You can make a new report in the same location.